Radial roller bearing 6-42205AE1USH1, A = Increased bearing load capacity. E1 = Separator made of plastic material (textolite, polyamide, etc.). U = Additional requirements for machining parts (coatings, radial and axial clearance, etc.)

Radial roller bearing 6-42205AE1USH1, the design of which consists of a pair of rings and roller bearings placed between them. Depending on the application, there are single-row and double-row models, variants with a tapered (taper 1:12 or 1:30) or cylindrical seat, with a locking sleeve for mounting on smooth surfaces, with clamping mounting systems.

A = Increased bearing load capacity. E1 = Separator made of plastic material (textolite, polyamide, etc.). U = Additional requirements for machining parts (coatings, radial and axial clearance, etc.)

Specifications

Width B: 15
Outer diameter D: 52
Inner diameter d: 25
Size: 25x52x15
Weight, kg: 0.139

Bearing application

VAZ 2123 Niva 1998-2002 Gearbox housing/rear shaft support for gear block
VAZ 21231 Niva 1999 Gearbox housing/rear shaft support for gear block
VAZ 21236 Chevrolet Niva 1.7i 2002 Gearbox housing/rear shaft support for gear block
VAZ Granta 1.6 Norma 2011 Primary shaft of gearbox
VAZ Granta 1.6 Standart 2011 Primary shaft of gearbox

Modifications of bearing 6-42205 AE1USH1

42205 Basic design.
42205 E E = Contact angle 25 degrees.
42205 D D = Separator or other bearing parts made of aluminum alloy.
42205 M M = Modernized design.
42205KM K = Tapered bore, 1:12 taper. M = Mechanically machined brass cage, centered on rollers.
42205 KM K = Design change depending on bearing type. M = Modernized design.
42205 D1 D1 = Separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
5-42205 P P = Bearing parts made of heat-resistant (high-speed) steels.
5-42205 B B = Bronze cage.
5-42205 D D = Cage or other bearing parts made of aluminum alloy.
6-42205 E E = Contact angle 25 degrees.
7-42205 D1 D1 = Separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
7-42205 AE A = Increased load capacity of the bearing. E = Separator made of plastic material (textolite, polyamide, etc.).
8-42205 KM K = Design change depending on the bearing type. M = Modernized design.
5-42205 B1 B = Bronze separator. 1 = Modified separator design.

5-42205 D1 D1 = separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
6-42205 AE A = Increased bearing load capacity. E = Separator made of plastic material (textolite, polyamide, etc.).
6-42205 D1 D1 = Separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
66-42205 KM K = Design change depending on the type of bearing. M = Modernized design.
66-42205 AE A = Increased bearing load capacity. E = Separator made of plastic material (textolite, polyamide, etc.).
70-42205 D1 D1 = Separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
76-42205 D1 D1 = Separator or other bearing parts made of aluminum alloy. Minimum operating temperature of the bearing is 180 degrees.
42205A1EUS1 S1 = Reduced vibration levels.
6-42205 AESH1 S1 = Reduced vibration levels.
7-42205 AESH1 S1 = Reduced vibration levels.
42205A1E1USH1 S1 = Reduced vibration levels.
6-42205 A1ESh1 Sh1 = Reduced vibration levels.
66-42205 AESh1 Sh1 = Reduced vibration levels.
76-42205 AESh1 Sh1 = Reduced vibration levels.

66-42205 AEMSH1 A = Increased bearing load capacity. E = Separator made of plastic material (textolite, polyamide, etc.). M = Depends on the bearing type; for more detailed information, please contact our specialist
66-42205 A1ESH1 SH1 = Reduced vibration levels.
6-42205 A1EUSH1 SH1 = Reduced vibration levels.
6-42205 A1E1USH1 E1 = Plastic separator (textolite, polyamide, etc.). U = Additional requirements for machining parts (coatings, radial and axial clearance, etc.).
B66-42205 AEM1S1 S1 = Reduced vibration levels.

FAQ

Q1: ARE YOU TRADING COMPANY OR MANUFACTURER？

A: We are factory and doing exporting by ourself.

Q2: WHAT’S YOUR AFTER-SALES SERVICE AND WARRANTY?

A: 1. 12 months warranty or 30000km;

2. Replacements would be sent with goods of your next order;

3. Refund for defective products if customers require.

Q3: DO YOU PROVIDE SAMPLES？IS IT FREE OR EXTRA？

A: Samples and trial order are both available, the sample can be free if it’s not a big value, customer is supposed to take the courier charge.

Q4: DO YOU ACCEPT ODM&OEM ORDERS?

A: Yes, we provide ODM&OEM services to worldwide customers, can also customize packaging box as per your requirements.