564734.H195 VKBA5549 SET1334 HDS222 Rear Truck Hub Assembly for SAF 9019-1122 Schmitz Cargobull SKI SPR SCS SKO
| Type | Double row tapered bearing with flange |
|---|---|
| Application | SAF 9019-1122, Schmitz Cargobull SKI/SPR/SCS/SKO |
| Dimensions | 82 x 196 x 113 mm |
| OE Number | 4200200100 |
| Material | Chrome steel GCr15 |
| Warranty | 12 months |
Product Description
564734.H195 rear truck hub assembly — a complete flanged hub unit with double row tapered bearing for SAF trailer axles (RZ, RS, RSK, WRS, WRZ, 9019-1122) and Schmitz Cargobull trailers (SKI, SPR, SCS, SKO). Replaces OE 4200200100; cross-references VKBA5549, SET1334 and HDS222. GCr15 chrome steel, ISO9001/TS16949 certified, 12-month warranty. Wholesale and OEM/ODM orders available.
564734.H195 Rear Truck Hub Assembly for SAF and Schmitz Cargobull Trailers
The 564734.H195 is a complete rear truck hub assembly for SAF trailer axles and Schmitz Cargobull trailers. It is a double row tapered bearing with flange — the bearing and the flanged hub are supplied as one assembled unit, so the complete part is replaced in a single operation instead of pressing a bare bearing into an old hub. It replaces OE numbers including 4200200100, 4200200101, 100167600, 100167601, 1002689 and 1003457, and cross-references VKBA5549, SET1334, HDS222, F-300001 and BTF0056EB.
What Is the 564734.H195 Truck Hub Assembly?
The 564734.H195 is a rear wheel hub unit for heavy trailers. Two rows of tapered rollers run on ground raceways inside a flanged hub, so the bearing carries the vertical load of the trailer as well as the cornering and braking forces at the same time. Because the flange, the bearing and the seal seat are machined as one balanced assembly, the part bolts to the axle stub in one fitting step — there is no bearing press work and no setting of bearing end-float on the bench.
On trailers that run loaded for most of their working life, the hub bearing is a genuine wear item. Long motorway mileage, kerb strikes, overloaded axles and water ingress through tired seals all shorten its life. The usual symptoms are a rumbling or grinding noise that rises with road speed, wheel play when the axle is jacked up, grease weeping past the seal, or heat at the hub after a run. Fitting the complete 564734.H195 assembly rather than a loose bearing restores the correct bearing preload, the correct flange face and a fresh seal surface in one job, which is why fleets and workshops keep the complete unit on the shelf.
Specifications
| Model number | 564734.H195 |
|---|---|
| OE numbers | 4200200100, 4200200101, 100167600, 100167601, 1002689, 1003457 |
| Cross-reference numbers | VKBA5549, SET1334, HDS222, CRF-41.03650, F80540601TR2T, F809302TR2T, F-300001, BTF0056EB, 83-00600-SX, F564734TR2TH195 |
| Product type | Double row tapered bearing with flange (truck wheel hub assembly) |
| Position | Rear wheel hub |
| Application | SAF 9019-1122; Schmitz Cargobull SKI / SPR / SCS / SKO |
| Bearing size | 82 x 196 x 113 mm |
| Material | Chrome steel GCr15 |
| Quality standard | P6, P5, P4, P2 |
| Net weight | 15.3 kg |
| Condition | Brand new |
| Purpose | Replacement / repair |
| Brand | VLBG, or as required |
| Warranty | 12 months |
| Certification | ISO9001 / TS16949 |
| Place of origin | Shandong, China |
| Package size | 25 x 25 x 25 cm |
| Gross weight (single carton) | 17.0 kg |
Trailer and Axle Compatibility
The 564734.H195 fits the following trailer axles:
- SAF — RZ, RS, RSK, WRS, WRZ (1987-1994)
- SAF — 9019-1122
- Schmitz Cargobull — SKI, SPR, SCS, SKO
OE numbers covered include 4200200100, 4200200101, 100167600, 100167601, 1002689 and 1003457. The part is also sold under the analog reference numbers VKBA5549, CRF-41.03650, F80540601TR2T, F809302TR2T, F-300001, SET1334, HDS222, F56473401TR2TH195, F564734TR2TH195, BTF0056EB and 83-00600-SX — so if you have the old unit in your hand, compare the number stamped or cast on the hub against this list.
Trailer brakes and axles change between build years and markets, so it is worth confirming before you order. Send us your trailer make, axle model or the number on the old hub, and our engineers will verify the correct reference against our catalogue.
Key Features and Benefits
- Complete flanged hub assembly. Bearing, flange and seal seat come as one balanced unit, so the part bolts onto the axle stub with no press and no end-float setting.
- Double row tapered bearing. Two rows of tapered rollers carry radial and axial loads together — the duty cycle a loaded trailer axle actually sees.
- Chrome steel GCr15. Rings and rollers are made from GCr15 (100Cr6, SAE 52100 equivalent) bearing steel, through-hardened for high load capacity and resistance to rolling contact fatigue.
- Quality grades to order. Production is held to P6, P5, P4 or P2 vibration and dimensional grades, so you can match the specification your fleet standard calls for.
- Sealed unit. The assembly is supplied with its seal and mounting bolts, keeping water, grit and road salt away from the raceways.
- Heavy-duty rating. 15.3 kg net unit weight, sized at 82 x 196 x 113 mm for trailer axles rather than light commercial hubs.
- 12-month warranty on every batch, with 10-day lead time on orders up to 1,000 pieces.
Materials, Quality Control and Certifications
Rings and rolling elements are produced from GCr15 chrome bearing steel, chosen for hardness, dimensional stability and resistance to rolling contact fatigue. Raceways are ground and superfinished to control roundness, surface roughness and contact angle — the three things that decide how quiet a truck hub runs and how long it lasts.
Production runs on lines certified to ISO9001 and TS16949 (automotive quality management). Incoming steel, heat-treatment hardness, raceway geometry and finished-unit rotation are checked batch by batch. Each shipment carries a 12-month warranty: if a unit does not meet specification, we replace it with the goods on your next order or refund it, whichever you prefer.
OEM and ODM Customization
We manufacture for distributors and brands as well as for our own catalogue, so the 564734.H195 can be supplied under your own identity:
- Custom logo — minimum order 1,000 pieces
- Custom packaging — your box artwork and print, minimum order 1,000 pieces
- Graphic customization — labels, inserts and carton graphics, minimum order 1,000 pieces
- Brand options — VLBG, neutral, or your own brand
Send us your artwork or a sample and we will confirm tooling, proofs and lead time before production starts. Neutral packing is available for distributors who prefer to ship unbranded.
Why Choose VLBG as Your Bearing Manufacturer in China?
VLBG is a bearing manufacturer and exporter based in Shandong, China. We supply bearing kits and bearings in both metric and inch sizes, and support customers with OEM and ODM programmes. Compared with other bearing suppliers, our advantages are:
- Over 10 years of export experience in global markets
- Certified quality systems meeting international automotive standards
- A wide product range covering automotive, agricultural, industrial and oil-drilling bearings and parts
- Customization and OEM services to support brand growth
- Reliable logistics and after-sales support
- Flexible payment solutions tailored to regional needs
If you are looking for a reliable supplier of trailer and truck hub assemblies in China, browse our wheel hub range or see the rest of our truck parts.
Frequently Asked Questions
Is the 564734.H195 a complete hub assembly or just a bearing?
It is a complete rear truck hub assembly. The double row tapered bearing is built into the flanged hub, so you replace the whole unit instead of pressing a bare bearing into the old hub and resetting the end-float.
How do I confirm it fits my trailer?
Cross-check the OE numbers 4200200100, 4200200101, 100167600, 100167601, 1002689 and 1003457, or the reference numbers VKBA5549, SET1334, HDS222, F-300001 and BTF0056EB, against the part you are removing. If you are unsure, send us your trailer make, axle model or the number cast on the old hub and we will confirm the correct reference.
Which axles does this hub fit?
It is specified for SAF RZ, RS, RSK, WRS and WRZ axles (1987-1994), SAF 9019-1122, and Schmitz Cargobull SKI, SPR, SCS and SKO trailers.
Are you a trading company or a manufacturer?
We are a factory and we handle our own exporting, which is how we hold short lead times and quote directly without a middle layer.
What is the warranty and after-sales service?
Every unit carries a 12-month warranty. Replacements are sent with the goods on your next order, and we refund defective products if you prefer. Claims are handled by the same team that manages your account.
Do you provide samples, and are they free?
Samples and trial orders are both available. Small-value samples can be supplied free of charge; the customer covers the courier cost.
Do you accept ODM and OEM orders?
Yes. We provide ODM and OEM services to customers worldwide and can customize the packaging box to your requirements, from 1,000 pieces per reference.
What is the minimum order quantity?
Trial and small-batch orders are available for this hub assembly, and there is no need to fill a container to start. Custom logo, packaging and graphic requirements start at 1,000 pieces per reference. Send us your target quantity and destination port and we will reply with a full quotation.
Request a Quote for the 564734.H195 Truck Hub Assembly
Tell us the quantity, packaging preference and destination port, and we will come back with price, lead time and freight options. Send the number from your old hub or your trailer axle model if you would like us to confirm fitment first.
