Jul 5, 2021
The design of the ball bearing article 50706 is typical. These are two clips, in the space between which rolling bodies are placed – balls. The product is originally intended for installation in sealed units, therefore no protective seals are provided.
The dimensions of the bearing are 30x75x19 mm. The weight of individual items may vary, but does not exceed 0.4 kg.
Dimensions and characteristics of bearing 50706:
Inner diameter – 30 mm;
Outside diameter – 75 mm;
Width – 19 mm;
Number of balls – 7 pcs.;
Ball diameter – 14.288 mm;
Groove diameter – 71.83 mm;
Groove bead thickness – 3.28 mm;
Groove width – 1.9 mm;
Rated speed – 10,000 rpm
Dynamic loading capacity – 26 k / N.
In general, 6-50706 is:
6 – normal accuracy;
50 – groove on the outer ring;
7 – series;
06 – code designation of the inner diameter.
Application:
Transmission of passenger cars VAZ “Classic” (from 2101 to 2107), as well as the input shaft of the gearbox and the drive shaft of the transfer case “Niva” (or bearing 750706 – with two shields);
Minibuses and small-tonnage trucks “Sobol” – rear support and gearbox output shaft;
Passenger cars GAZ (31022, 31023, 31029, 3110) – gearbox (primary and secondary shaft);
Minibuses RAF (checkpoint).
Jul 5, 2021
The main load taken by 50306 is radial. A slight axial impact on it is allowed, but it should not exceed 70% of the unused radial component. Product dimensions – 30x72x19 mm.
Parameter:
Outer diameter D 72 mm
Inner diameter d 30 mm
Width B 19 mm
Groove diameter for thrust washer D1 68.8 mm
Dynamic load C 28100 N
Mounting chamfer coordinate r 2.0 mm
Distance from end to edge of groove a 3.25 mm
Groove width for thrust washer b 1.9 mm
Bearing weight m 0.326 kg
Rolling body – Ball Dw 12.303 mm
Number of rolling elements 8 pcs
GOST ISO Explanation
306 6306 open bearing
50306 6306 N open groove bearing
60306 6306 Z closed on one side with a metal washer
80306 6306 ZZ (2Z) closed on both sides with metal washers
160306 6306 RS closed with rubber plug on one side
180306 6306 2RS closed with rubber plugs on both sides
76-306 6306 C3 open with thermal gap
Other number:
6306 N, 306 Е5, 180306 КС17, 50306 А, 50306 Е5, 50306 К, 180306 С9, 50306 КУ2, 50306 КУШ1, 80306 А, 750306 АК, 180306 Ш2У, 6306TB/P4, 6306TB/P5, 6306P6TN, 6306/C3E, 6306TB/P6E, 6306TB/P63E, 6306TB/P53Q6, 6306NTN9, 6306N/P6, 6306N/P3C4, 60306 К1, 6306-Z/P63, 750306 АКУ, 6306.2RSN.Р6, 80306 К, 6306-2Z/P6, 80306 К1С9, 6306-2Z/P6LGHT3, 80306, 6-60306 К, 6-60306
Application:
Mainly 50306 is used as a gearbox bearing. It works in the transmission of VAZ-2101-2107 cars. Operated in the checkpoint of all UAZ models. It is found in the units of many commercial vehicles produced by GAZ.
Among other things, it can be found in domestic tractors. He works in PTO MTZ-50 (52), MTZ-80 (82).
Jun 25, 2021
This is a single-row deep groove ball bearing of the main design of a closed type with rubber boots (more precisely, polyamide, reinforced with metal). This feature protects the internal cavity of the product from moisture and contaminants and retains the lubricant. Series – 300 (there is a narrower series 200 and a wider 500). Universal – accepts radial and axial loads due to deep raceways, whose radius is almost equal to the size of the balls (axial to a lesser extent), due to which such ball bearings are widely used. A similar bearing closed with metal washers has the number 80302, and an open one – 302
Bearing 180302 (6302-2RSl) single-row radial with seals pre-adjusted, sealed with rubber seals and filled with grease already at the factory, the plugs on it protect from dirt, dust and moisture.
Parameter:
Inner diameter 15
Outer diameter 42
Width 13
Loading capacity dynamic 11.4
Load capacity, static 5.4
Weight 0.085kg
Steel grade:GCR15
Other OE number:
302, 60302, 80302, 180302, 50302, 6302-2RSH, 6302-2RSR, 6302DDU, W6302-2RS1, 6302-2NSE9, 6302EE, 6-180302 У2С9, 6-180302 С9, 6302-2RSL, 2101-24940230
Application:
| Bearing gost |
Application |
| 180302 |
Car Automobile transport |
| 6-180302 У |
VAZ-1111 OKA Generator |
| 6-180302 У1С9 |
VAZ-2101 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2102 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2103 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2105 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2106 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2107 car Passenger car Generator |
| 6-180302 У1С9 |
VAZ-2121 car Off-road passenger car Generator |
| 6-180302 У |
VAZ-21213 car Off-road passenger car Generator, support on the drive side |
| 6-180302 У1С9 |
GAZ-4301 vehicle Cargo vehicle Generator (front support) |
| 6-180302 У1С9 |
ZAZ-1102 Tavria car. Passenger car Generator |
| 6-180302 У1С9 |
LuAZ-1302 car Off-road passenger car Generator, front support |
| 5-180302 С 9 Ш 1 |
Car VAZ-1111 OKA Generator (180202/180302) |
| 6-180302 У |
Car VAZ-1111 OKA Generator (180302/180201) |
| 5-180302 С 9 Ш 1 |
Car VAZ-2101-2109 Generator (180302/180201) |
| 5-180302 С 9 Ш 1 |
Car VAZ-2101-2109 Generator (180202/180302) |
| 6-180302 У 1 С 9 |
Car VAZ-2121 Niva Generator (180302/180201) |
| 5-180302 С 9 Ш 1 |
Car VAZ-2121 Niva Generator (180202/180302) |
| 6-180302 У 1 С 9 |
GAZ-4301 car |
| 6-180302 У 1 С 9 |
GAZ-4509 car |
| 5-180302 С 9 Ш 1 |
ZAZ-1102 Tavria car. Passenger car Generator |
| 6-180302 У 1 С 9 |
ZAZ-1102 Tavria car. Passenger car |
Jun 25, 2021
Packing: single box or as customer requirement, Seal: double rubber seal
62 – medium series ball bearing;
01 – code designation of the inner diameter.
RS (2RS) – one plug of contact type (two plugs).
Both bearings can operate under radial load conditions. Their carrying capacity is completely identical. In statics, it does not exceed 3.1 kN, in dynamics it increases to 6.9 kN.
Other related bearing number:
201 6201 open bearing
50201 6201 N open groove bearing
60201 6201 Z closed on one side with a metal washer
80201 6201 ZZ (2Z) closed on both sides with metal washers
160201 6201 RS closed with rubber plug on one side
180201 6201 2RS closed with rubber plugs on both sides
76-201 6201 C3 open with thermal gap
Parameter:
Bearing number: 180201
Alternative designation: 6201-2RS
Inner diameter: 12
Outer Diameter: 32
Thickness: 10
Weight: 0.034
Open / Closed: Rubber covered
Load type: Radial
Number of rows: Single row
Note: (6201 2RS)
Application:
| Bearing designation |
Bearing application |
| 180201 |
Car Automobile transport |
| 6-180201 У1С9 |
VAZ-2101 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2102 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2103 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2105 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2106 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2107 car Passenger car Generator |
| 6-180201 У1С9 |
VAZ-2121 car Off-road passenger car Generator |
| 6-180201 У |
VAZ-21213 car Off-road passenger car Generator, support on the rectifier side |
| 6-180201 У1С9 |
GAZ-4301 vehicle Cargo vehicle Generator (rear support) |
| 6-180201 У1С9 |
ZAZ-1102 Tavria car. Passenger car Generator |
| 6-180201 У1С9 |
LuAZ-1302 car Off-road passenger car Generator, rear support |
| 5-180201 У 2 Ш 2 С 9 |
Car VAZ-1111 OKA Generator (180302/180201) |
| 6-180201 У 1 С 9 |
Car VAZ-2101-2109 Generator (180302/180201) |
| 5-180201 У 2 Ш 2 С 9 |
Car VAZ-2121 Niva Generator (180302/180201) |
| 6-180201 У 1 С 9 |
Car GAZ-4301 Generator (180302/180201) |
| 6-180201 У 1 С 9 |
Car GAZ-4509 Generator (180302/180201) |
| 5-180201 У 1 С 9 |
ZAZ-1102 Tavria car. Passenger car Generator (180302/180201) |
| 180201 |
Agreecultural machines. Agreecultural equipment |
| 180201 |
Power tool Impact drill Zenit ZDP-700 Drive shaft, chuck side |
| 180201 |
Power tools Chain saw Zenith TsPL-405/1600 Output shaft |
| 180201 |
Power tools Chain saw Zenith TsPL-405/1600 Electric motor armature, slotted side |
| 180201 |
Power tools Chain saw Zenith TsPL-406/2500 Output shaft |
| 180201 |
Power tools Circular saw Zenith ЗПЦ-2300 Electric motor armature, collector side |
| 180201 |
Power tools Circular saw Zenith ZPTs-2300 Electric motor armature, slotted side |
| 6-180201С17 |
Power tool Surface grinder Fiolent MPSh1-28 Eccentric shaft (1pc), base (2pc) |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-1150 Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-1150R Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-1250 Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-1250R Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-1600R Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-800 Reducer, drive shaft |
| 180201 |
Power tools Angle grinder Dnipro-M MShK-980 Reducer, drive shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/1100 P Output shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/1200 P Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/1250 Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/800 Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/870 Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/900 P Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/950 P Output Shaft |
| 180201 |
Power Tools Angle Grinder Zenit ZUSH-125/960 Output Shaft |
| 180201 |
Power tools Angle grinder Zenit ZUSH-180/1700 Electric motor armature, slotted side |
| 180201 |
Power tools Angle grinder Zenit ZUSH-180/2200 P Electric motor armature, slotted side |
| 180201 |
Power tools Angle grinder Zenit ZUSH-230/2400 P Electric motor armature, slotted side |
| 180201 |
Power tools Angle grinder Zenit ZUSH-230/2500 P Electric motor armature, slotted side |
| 180201 |
Power tool Vibration sander Zenith ZVSH-550 Electric motor armature, slotted side |
| 180201 |
Power tool Vibration sander Zenit ZVSH-950 Electric motor armature, slotted side |
Jun 15, 2021
Model number: UCP206, Material: GCR15, Application: agricultural machinery, Weight:1.15kg, Bearing: UC206, Housing: P206
The UCP206 bearing unit consists of a UC206 deep groove ball bearing and an arch-shaped housing – P206. As you can easily guess, the sale of the UCP 206 unit is carried out both in a complete form and in the form of components, each of which has an individual packaging. Individual components can be included in other bearing assemblies (for example, the housing is part of the UKP206 assembly, and the bearing is UCF206). Detailed table of bearing units of different series. The sizes UCP2 .. are the lightest (there is also UCPX .. and UCP3 .. for larger sizes) and are designed for normal use. The units are distinguished by their quiet operation and the ability to take both radial and, to a lesser extent, axial loads, just like conventional deep groove ball bearings. Detailed information about bearing housings.
The international designation UCP206 can be expanded according to the usual scheme:
UC – design features of a deep groove ball bearing;
P – body type;
2 – a series of outer diameters;
06 – coding of the size of the connecting hole.
Parameter:
| Feature Value |
Flanged bearing assembly |
| Housing |
P206 |
| Bearing |
UC206 |
| GOST |
480206UCP |
| ISO |
UCP206 |
| Load-bearing |
Radial |
| Int. diameter d, mm |
30 |
| Width B, mm |
38.1 |
| Length L, mm. |
165 |
| Overall height H, mm |
83 |
| Shaft axis height H1, mm. |
42.9 |
| Distance between the centers of the mounting holes J, mm |
121 |
| Rated dynamic load capacity, N |
18500 |
| Rated static load capacity, N |
10700 |
| The width of the foot of the knot A, mm |
48 |
| Recommended diameter of the fastening bolt / stud, mm |
12 |
| fixing screw |
M10 |
| Weight, gram |
1150 |
|
|
Application:
The main area of use of these spare parts is equipment for factories and plants. They are used in the chemical industry and metallurgy. They work in the workshops of enterprises producing plywood and wood waste boards.
Among other things, UCP206 (UC206 + P206) can be found in agricultural machinery. These are mainly units for soil cultivation
