| Cardan shaft | 904902 К5С10 | 14,723×23,84×13,1 | Single row radial needle roller without inner ring and cage | 20 |
| Generator | 6-180201 У1С9 | 12х32х10 | Single-row radial ball bearing with double-sided sealing | 1 |
| Generator | 6-180302 У1С9 | 15х42х13 | Single-row radial ball bearing with double-sided sealing | 1 |
| Differential | 6-209 К5У | 45x85x19 | Single-row radial ball | 1 |
| Differential | 6-50209 К5У | 45x85x19 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Jack | 8903 | — | Ball thrust single | 1 |
| Gearbox (secondary shaft) | 6-205 КУ | 25x52x15 | Single-row radial ball | 1 |
| Gearbox (secondary shaft) | 6-50306 КУ | 30х72х19 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Gearbox (secondary shaft) | 464904 Е | 19,3×25,3×19,8 | Needle single row without rings | 1 |
| Gearbox (primary shaft) | 6-50706 У | 30x75x19 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Gearbox (primary shaft) | 6-180502 К1УС9 | 15x35x14 | Single-row radial ball bearing with double-sided sealing | 1 |
| Gearbox (intermediate shaft) | 6-156704 | 20x50x20,6 | Double-row angular contact ball bearing | 1 |
| Rear axle | 6-7705 У | 28х67х20,5 | Single row tapered roller with increased load capacity | 1 |
| Rear axle | 6-7707 У | 33х62х16,5 | Single row tapered roller with increased load capacity | 2 |
| Rear axle | 6-7807 У | 35х73х27 | Single row tapered roller with increased load capacity | 1 |
| Rear axle | 6-180508 К2УС9 | 40x80x23 | Single-row radial ball bearing with double-sided sealing | 2 |
| Rear axle (drive shaft) | 6-305 У | 25x62x17 | Single-row radial ball | 1 |
| Front axle | 6-7705 У | 28х67х20,5 | Single row tapered roller with increased load capacity | 1 |
| Front axle | 6-7707 У | 33х62х16,5 | Single row tapered roller with increased load capacity | 2 |
| Front axle | 6-7807 У | 35х73х27 | Single row tapered roller with increased load capacity | 1 |
| Front axle | 6-50306 Е2У | 30х72х19 | Single row radial ball bearing with a groove on the outer ring | 2 |
| Front axle (drive shaft) | 6-305 У | 25x62x17 | Single-row radial ball | 1 |
| Water pump | 6-330902 ЕС17 | 16x30x115 | Ball radial double row with double-sided seal with a bead instead of the inner ring | 1 |
| Transfer case (drive shaft) | 6-50306 КУ | 30х72х19 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Transfer case (intermediate bearing, shaft) | 6-12507 КМУ | 35x72x23 | Roller radial | 1 |
| Transfer case (intermediate shaft) | 6-50306 Е2У | 30х72х19 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Distributor | 7690906 | 30x47x8 | Single-row radial ball | 1 |
| Steering | 6-776900 Х | 11x39x29 | Double-row angular contact ball bearing with one-piece outer and split inner ring | 1 |
| Steering | 836904 | — | Single row angular contact ball bearing with stamped rings | 2 |
| Steering | 904900 | 10x16x10.45 | Single row radial needle roller without inner ring and cage | 2 |
| Steering | 996805 Е1 | 28x50x20.15 | Ball thrust single row without one ring | 1 |
| Steering | 996905 Е1 | 28x47x13,15 | Ball thrust single without one ring | 1 |
| Steering (shaft support) | 2105-3401120 | — | Single row radial needle roller without inner ring with cage | 2 |
| Front wheel hubs | 6-2007108 А | 40х68х19,2 | Single row tapered roller with increased load capacity | 4 |
| Clutch | 360708 КС17 | 40x70x18 | Single-row radial ball | 1 |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
