| Bearing installation location | Bearing designation | Size | Bearing type | Quantity |
| Power take-off shaft (rear support) | 210 | 50×90×20 | Single-row radial ball | 1 |
| Generator G46-G (back support) | 204 | 20×47×14 | Single-row radial ball | 1 |
| Generator G46-G (front support) | 60204 | 20×47×14 | Single row radial ball bearing with one shielding washer | 1 |
| Hydraulic mechanism (rear support) | 209 | 45×85×19 | Single-row radial ball | 1 |
| Hydraulic mechanism (front support) | 207 | 35×72×17 | Single-row radial ball | 1 |
| Engine (crankshaft of starting engine PD-10M and PD-10U, middle and rear supports) | 2206 | 30x62x16 | Radial roller with short cylindrical rollers without flanges on the outer ring | 2 |
| Engine (regulator shaft of starting motor) | 202 | 15×35×11 | Single-row radial ball | 2 |
| Engine (speed governor shaft) | 8202 | 15x32x12 | Single thrust ball | 1 |
| Engine (governor shaft, rear support) | 200 | 10×30×9 | Single-row radial ball | 1 |
| Engine (governor shaft, front support) | 36203 | 17x40x12 | Single-row angular contact ball bearing one-piece with a bevel on the outer ring with a contact angle α = 12º | 1 |
| Motor (rear fan drive support) | 208 | 40×80×18 | Single-row radial ball | 1 |
| Engine (front fan drive support) | 308 | 40x90x23 | Single-row radial ball | 1 |
| Engine (generator drive, front and rear mounts) | 209 | 45×85×19 | Single-row radial ball | 2 |
| Engine (fuel pump, front and rear camshaft bearings) | 6020 | 100×150×24 | Single row angular contact ball bearing with removable outer ring | 2 |
| Differential (right and left axle bearings) | 411 | 55×140×33 | Single-row radial ball | 2 |
| Final drive (driven gear, inner and outer bearings) | 317 | 85×180×41 | Single-row radial ball | 4 |
| Final drive (pinion, inner support) | 292218 | 107x160x30 | Radial roller with short cylindrical rollers without inner ring | 2 |
| Final drive (pinion, outer bearing) | 32216 | 80×140×26 | Radial roller with short cylindrical rollers without flanges on the inner ring | 2 |
| Gearbox (secondary shaft, rear support) | 32612 | 60×130×46 | Radial roller with short cylindrical rollers without flanges on the inner ring | 1 |
| Gearbox (secondary shaft, front support) | 50408 | 40x110x27 | Single row radial ball bearing with a groove on the outer ring | 1 |
| Gearbox (primary shaft, front and rear support) | 42211 КМ | 55x100x21 | Radial roller with short cylindrical rollers with a single flange inner ring | 2 |
| Gearbox (intermediate shaft, rear support) | 310 | 50×110×27 | Single-row radial ball | 1 |
| Gearbox (intermediate shaft, front support) | 211 | 55×100×21 | Single-row radial ball | 1 |
| Gearbox (reverse gear) | 206 | 30×62×16 | Single-row radial ball | 2 |
| Transmission (intermediate gear) | 208 | 40×80×18 | Single-row radial ball | 2 |
| Magneto (rotor, front and rear legs) | 6012 | 60×95×18 | Single row angular contact ball bearing with removable outer ring | 2 |
| Front axle (right and left support) | 8210 | 50x78x22 | Single thrust ball | 2 |
| Drive pulley (driven shaft, right and left support) | 408 | 40×110×27 | Single-row radial ball | 2 |
| Drive pulley (drive shaft, front support) | 408 | 40×110×27 | Single-row radial ball | 1 |
| Starting motor (governor gear) | 202 | 15×35×11 | Single-row radial ball | 2 |
| Starting engine PD-10M (transmission mechanism) | 207 | 35×72×17 | Single-row radial ball | 4 |
| Starting engine PD-10M PD-10U (crankshaft, front support) | 205 | 25×52×15 | Single-row radial ball | 1 |
| Starting motor PD-10M and PD-10U (gear) | 202 | 15×35×11 | Single-row radial ball | 2 |
| Steering (bipod shaft) | 922205 К | 25x52x15 | Single row radial roller without inner ring | 1 |
| Steering (worm) | 977909 | 46,673x72x17,2 | Conical angular contact roller without inner ring | 2 |
| Front wheel hubs (inner bearings) | 7609 | 45×100×38.2 | Single row tapered roller | 2 |
| Front wheel hubs (outer bearings) | 7608 | 40×90×35.25 | Single row tapered roller | 2 |
| Clutch (Rear Clutch Support) | 308 | 40×90×23 | Single-row radial ball | 1 |
| Clutch (Front Clutch Support) | 6-80205 С5 | 25x52x15 | Single row radial ball bearing with two shields | 1 |
| Braking system (front and rear support) | 308 | 40×90×23 | Single-row radial ball | 4 |
| Creeper | 208 | 40×80×18 | Single-row radial ball | 2 |
| Creeper (primary and secondary shaft, rear support) | 50308 | 40×90×23 | Single row radial ball bearing with a groove on the outer ring | 2 |
+86 15665851157
admin@sdvolga.com
