2101-2403080 180306 VAZ용 변속기 베어링 크기 30x72x19 2101-2107 판매

베어링 180306 is a single-row deep groove ball bearing, closed with rubber plugs on both sides, reinforced with sheet steel, 19 mm wide, 내경 30 mm, 외경 72 mm, total weight 0.35 킬로그램.
Lubricating fluid is introduced into such an element during assembly. The open type is able to provide a threshold speed slightly higher than the closed type of product.

180 – performance features;

3 – a series of widths;
06 – code of the inner diameter.
The bearing can be operated up to 16 kN when stationary and up to 28.1 kN when operating at rated speed. The limiting speed is 10,000 rpm.
GOST ISO 설명:
306 6306: 오픈 베어링
50306 6306 N: open groove bearing
60306 6306 지: closed on one side with a metal washer
80306 6306 ZZ (2지): 금속 와셔로 양쪽에 닫힘
160306 6306 RS: closed with rubber plug on one side
180306 6306 2RS: closed with rubber plugs on both sides
76-306 6306 C3: open with thermal gap

매개변수:

내경 – 30 mm;
외경 – 72 mm;
키 – 19 mm;
무게 – 0.35 킬로그램;
공의 수 – 8 개;
볼 직경 – 12.303 mm;
정격 속도 – 11000 rpm;
동적 리프팅 용량 – 28.1 kN.

신청:

Bearing with a groove for a retaining ring 50306 is installed in different units of VAZ cars – “classic”: 변속 장치, primary and secondary shafts and “수준” 그리고 “Chevrolet-Niva” (front axle inner hinge housing, 변속 장치), minibuses and Gazelle light trucks (transfer case input shaft), ErAZ minibuses (변속 장치), MTZ tractors (power take-off shaft), almost all models of light trucks, minibuses and UAZ cars (transmission intermediate shaft and transfer case).

Closed bearings 180306 are installed on the rear axle of the VAZ “고전” (2101-2107) and the “모스크바”, the drive of the unloading device of the “Don” combines, the generator-exciter of the BelAZ dump trucks.

Open bearings 306 are installed on KamAZ trucks (power take-off gear axle), 가즈 (secondary and intermediate transfer case shafts), BelAZ (power take-off), 마즈 (generator and engine), engines and electric motors of tram cars. They are widely used in DT and MTZ tractors, Don and Niva combines, forklift trucks and many other products of domestic engineering.