Kolos SK 6 is a popular Soviet grain harvester manufactured by the Taganrog Combine Plant. The technique looks very impressive and resembles a huge ship with 2 large bunkers placed on the sides.
The Kolos SK 6 harvester was actively used in agriculture. The technique confidently collected grain crops, the threshing process of which caused difficulties for most combines of that time. The Kolos SK 6 models raised the ears and cut them at the root, after which the threshing began. The resulting mass entered a bunker with 2 storage sections, where it was stored until it was loaded into a car.
베어링 설치 위치 | 베어링 번호 | 크기 | 베어링 유형 | 수량 |
Drum, 구동축 | 11312 에게 | 60x140x50 | Ball radial spherical double row with adapter sleeve | 4 |
Undercarriage variator pulley block | 308 | 40×90×23 | 단열 방사형 볼 | 2 |
Lower header variator shaft | 8109 | 45x65x14 | 싱글 스러스트 볼 | 2 |
Driving crankshaft, driven crankshaft | 380507 | 단열 방사형 볼 | 10 | |
Header counter drive shaft, header knife rocker, tension pulley, unloading auger drive, bunker auger | 180206 | 30x72x35 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 6 |
Header crank shaft | 180508 에게 | 40x80x23 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 2 |
Lower conveyor shaft | 580204 에게 | 20x47x14 | Single-row radial ball bearing with two seals with a spherical outer surface of the outer ring | 2 |
Rear Suspension Rifle | Ш20 | 20x35x16 | Articulated without holes and lubrication grooves | 4 |
Cardan drive, hopper auger turn | 704902 К4С10 | 15,235x28x20 | Single row radial needle roller without inner ring and cage | 12 |
전염 | 306 | 30×72×19 | 단열 방사형 볼 | 3 |
전염 | 309 에게 | 45×100×25 | 단열 방사형 볼 | 1 |
전염 | 50206 | 30x62x16 | 외부 링에 홈이 있는 단열 레이디얼 볼 베어링 | 1 |
전염 | 50208 | 40x80x18 | 외부 링에 홈이 있는 단열 레이디얼 볼 베어링 | 1 |
전염 | 50408 | 40x110x27 | 외부 링에 홈이 있는 단열 레이디얼 볼 베어링 | 1 |
전염 | 60309 에게 | 45×100×25 | 1개의 차폐 와셔가 있는 단열 방사형 볼 베어링 | 1 |
전염 | 180707 시즌 17 | 35x80x26 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 2 |
Tachometer drive housing | 180501 | 12x32x14 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 1 |
Drum speed control mechanism | 27308 | 40х90х25,25 | Single row tapered roller with large taper angle | 4 |
Drive wheel axle | 215 | 75×130×25 | 단열 방사형 볼 | 2 |
Steering axle | 7606 고대 | 30x72x29 | 단열 테이퍼 롤러 | 2 |
Steering axle | 7609 고대 | 45x100x38,25 | 단열 테이퍼 롤러 | 2 |
Clutch engagement assembly | 211 | 55×100×21 | 단열 방사형 볼 | 1 |
Engine clutch | 413 | 65×160×37 | 단열 방사형 볼 | 1 |
Unloading auger friction clutch | 845806 | 30x56x76 | Single row radial roller | 1 |
Dispenser pump | 8104 | 20x35x10 | 싱글 스러스트 볼 | 1 |
Dispenser pump | 942/20 | 20x26x20 | Needle roller with outer ring with through hole without cage | 1 |
Idler pulleys, tension sprockets, small ear auger, left grain elevator, grain elevators, right grain elevator, grain auger, fan speed variator | 180204 | 20x47x14 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 24 |
Hydraulic pump drive | 60106 | 30x55x13 | 1개의 차폐 와셔가 있는 단열 방사형 볼 베어링 | 1 |
Hydraulic pump drive | 60208 | 40x80x18 | 1개의 차폐 와셔가 있는 단열 방사형 볼 베어링 | 1 |
Drive to chassis | 1311 | 55x120x29 | Ball radial spherical double row with a cylindrical bore of the inner ring | 1 |
Receiving bitter, unloading auger drive, rebound bitter, rear counter drive, driving crankshaft, driven crankshaft, fan, oscillating shaft | 1680206 KS17 | 30x72x35 | Single-row radial ball bearing with two shields with a wide inner ring with a spherical outer surface of the outer ring on an adapter sleeve | 15 |
Onboard reducer | 7516 | 80x140x33 | 단열 테이퍼 롤러 | 2 |
Onboard reducer | 7517 에게 | 85х150х38,5 | 단열 테이퍼 롤러 | 2 |
Onboard reducer | 982807 | 35x77x38 | Roller double row | 6 |
조종 | 636905 | 23,5×36,5×14,8 | Angular contact ball single row stamped | 1 |
Header connecting rod, header counter drive shaft, grain elevator gearbox, grain elevator gearbox, right and left | 180205 에게 | 25x52x15 | 양면 씰링 기능을 갖춘 단열 레이디얼 볼 베어링 | 14 |
Oscillating shaft connecting rods | 1580209 에게 | 45x85x21 | Single-row radial ball bearing with two seals with a spherical outer surface of the outer ring | 2 |
Hopper auger | 580306 에게 | 30x72x19 | Single-row radial ball bearing with two seals with a spherical outer surface of the outer ring | 1 |
Unloading auger | 580306 에게 | 30x72x19 | Single-row radial ball bearing with two seals with a spherical outer surface of the outer ring | 1 |
Header auger, header feeder chamber upper shaft, rear counter drive, rebound bitter | 1680207 시즌 17 | 35x80x36 | Single-row radial ball bearing with two shields with a wide inner ring with a spherical outer surface of the outer ring on an adapter sleeve | 5 |
Header auger, small ear auger, grain auger counter drive, ear auger | 1680205 시즌 17 | 25x62x31 | Single-row radial ball bearing with two shields with a wide inner ring with a spherical outer surface of the outer ring on an adapter sleeve | 7 |